Fabric Testing Equipments

INCLINED FLAMMABILITY TESTER

The ASIAN Inclined Plane Type Flammability Tester made of a stainless steel ventilated draught proof box There is a specimen rack fitted inside the ventilated draught proof box which is adjusted latterly so that the surface of the tested fabric will be at a standard distance from the micro burner

SHRINKAGE TEMPLATE

SYNTHETIC HOOK LOOP TAPE

SNAP PUSH PULL TESTER

SWATCH CUTTER

Water Vapour Transmission Rate Tester

SUBLIMATION TESTER

COLOUR MATCHING CABINET

SPREAD OF FLAME TESTER

SMOKE VISIBILITY TESTER

MOISTURE METER

ZIP ENDURANCE TESTER

RADIANT HEAT TESTER

TOXICITY CHAMBER

BUNDESMANN WATER TESTER

The Bundesmann apparatus is usedto determine the resistance and the resistance to penetration by water of waterrepellent fabrics which are permeable to air Four specimens of the fabricunder test are simultaneously exposed to a simulated heavy shower of controlledintensity of the specimen is subjected to a rubbing action The increase inmass of the specimen during exposure to the shower is determined and any waterpassing through the fabric is collected and its volume determined

Horizontal Type Flammability Tester

GSM BALANCE

CROCK METER

ELEMENDORF TEARING STRENGTH TESTER

Used to test tearing strength of fabrics

STIFFNESS TESTER

THE ASIAN STIFFNESS TESTER MADE OF A FLAT, SMOOTH AND LOW FRICTION HORIZONTAL METTALIC SURFACE. THESE ARE TWO VERTICAL TRANSPARANT PLATES ON WHICH THE LINE ARE MARKED AT SPECIFIED ANGLE. THERE IS A METALLIC SCATE, THE BOTTOM SURFACE IS ATTACHED TO A RUBBER AND THE UPPER SURFACE ATTACHED TO A SCATE.

DRAPE METER

Fabric Drape is defined as the extent to which a fabric will deform when it is allowed to hang under its own weight. It is one of the subjective performance characteristics of fabric and contributes considerably to its aesthetic appeal. It is a complex characteristic involving both bending and shearing deformation. One of the methods of determining the drape characteristic in which both the wrap and weft way characteristics interact to produce a graceful fold uses a circular support over which a specimen of the fabric in form a circular piece is placed with an annular section overhanging the support. The horizontal area covered by the shadow left by the overhanging portion of the fabric is determined and compared against the actual area to obtain the coefficient.

CRIMP TESTER

The Crimp in a yarn is defined as the mean difference between the actual length of any yarn and its apparent length in the fabric after weaving. Its usually expressed as a percentage of the apparent length of the yarn in the fabric. Determination of the crimp of yarn is carried out by marking a known length on the fabric, removing the marked yarn in such a manner that its does not loose its twist, holding it between two grip at the marked point, and slowly extending it is subjected to a specified straightening and expressed as a percentage of marked length to obtain the value of crimp.

BEASLAY BALANCE

The ASIAN Beaslay Balance used for measure the direct yarn count. The balance made of an Aluminum beam, which is pivoted at a bracket with the help of two Jewel Bearings. One end of the beam has a stainless steel hook for putting the yarn.

CREASE RECOVERY TESTER

BUNDESMANN WATER REPELLCY TESTER

BEAKER DYEING MACHINE

Light Fastness Tester

ASIAN Digital Light Fastness Tester is used for determining the Color Fastness of textiles using on artificial light source.

Elmendorf Tear Strength Tester

Air Permeability Testing Machine

Martindale Abrasion Tester